Job Check
Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers
Set up, operate, or tend machines that extrude and form continuous filaments from synthetic materials, such as liquid polymer, rayon, and fiberglass.
10 main tasks · most important first
Your main tasks and AI
Importance- 01Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.Mostly human for now
- 02Press buttons to stop machines when processes are complete or when malfunctions are detected.Mostly human for now
- 03Notify other workers of defects, and direct them to adjust extruding and forming machines.Mostly human for now
- 04Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.Mostly human for now
- 05Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.Mostly human for now
- 06Move controls to activate and adjust extruding and forming machines.Mostly human for now
- 07Record details of machine malfunctions.AI could speed this up a lot
- 08Clean and maintain extruding and forming machines, using hand tools.Mostly human for now
- 09Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.Mostly human for now
- 10Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.Mostly human for now
Tasks from O*NET® 31.0 (US Department of Labor, CC BY 4.0, changed by us), most important first. “Already use” comes from Anthropic’s data on real work chats with Claude; “could speed up” from task ratings made with GPT-4 in 2023.
Four studies, side by side
None is a forecast of job lossToo little dataNot enough work use was seen to measure. This does not mean the job is safe from AI.Anthropic, 2026
7%of this job’s tasks an AI model could do in half the time, counting tasks that need extra tools as half (rated in 2023).Eloundou, Manning, Mishkin and Rock, 2023
Above 8% of jobsin how often and how well AI helped with this job’s work in Microsoft Copilot chats (2024 data).Microsoft Research (Tomlinson et al.), 2025
Above 93% of jobsin how much of this job’s physical work robots have been shown to do, from factories to homes (2026).Anthropic, 2026
Your human edge
The main tasks with no real AI use seen and no big speed-up expected. This is where your skill counts most today.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.